Didn't work for me, tore up work

I like the Kreg equipment and do lots of pocket hole jointery, so this seemed like a great addition - but it isn't. The trouble is the clamp is very heavy, and is fitting into a small pocket hole. Clamp it too tight, and it blows out the top of the pocket hole, marring your workpeice - and the same can happen if you do not somehow support this heavy clamp. If you do get one, don't use it on any surface that will ever be visable (i.e. a hole you are going to fill with a plug) and don't use it in an area you don't want marred. Pocket holes jointery is simple, efficient, and easy - this clamp is the exact opposite.

Get Two!

I had to buy this at a store, but it was worth it. I'm going to order a second one here at the better price. I just used it to attach 1x2 solid wood edging to plywood for a table top. The top joint line was perfectly smooth to the fingertip over a 6 foot length, because I was able to adjust it as I was going down the edge. That would never happen with a biscuit jointer! If you are looking at the Kreg Tools, get the Pocket System and one or two of these and you will save a lot of time and don't have to buy a biscuit joiner.

When you need it, nothing else will do

This is one of those tools that I didn't really want to spend $25.00 on (that price when I bought it). Once I had it, I no longer strugged to pocket hole right angle joints. Before, the board might shift slightly when tightening the screws - this clamp solved that. It's one of those things that has limited use, but when you need it, nothing else will do. If you make any cabinet based work, you have to have one. I have no regrets, it works great!